Chevy / Viper T-56

D&D Performance has been building and selling heavy duty 6 speed transmissions for Ford powered vehicles since 1993. In 1997 we introduced the first Viper T-56 gearset for Ford 5.0/5.8 applications and followed it up with a Viper unit for the 4.6 vehicles in 2000. We realized that there was a large void in the GM aftermarket T-56 area. Units on the market had gear ratios, input shafts, speedometer drives or shifter locations that were not suitable for retrofitting earlier vehicles. The D&D GM/Viper unit was introduced in 2002, and based on the reception it's received in the marketplace, it has very effectively solved the T56 retrofit problems with the following features:

	650 lb-ft Torque Capacity
	1.125 x 26T GM Input Spline
	30T Viper Output Spline
	Close Ratio w/ Deep Overdrives(2.66/1.78/1.30/1.00/.80/.62)
	Carbon Fibre Blocker Rings
	Steel 3-4 Shift Fork
	Precision built and blueprinted by D&D technicians
	Direct bolt-up to GM Saginaw/Muncie/T10 bell housings
	Direct bolt-up to 4-Speed aftermarket steel bell housings
	Accepts stock GM clutches,linkage,T.O.B.,pilot bearing,trans. mount
	7T GM Mechanical Speedo Drive or Electronic Speedo Drive
	$3499 In Stock ready for shipment